Allmand-brothers MAXI LITE II User Manual download pdf (Page 50)

MAXI-LITE II

5-5

MAINTAINING THE ENGINE

Refer to the Engine Operator’s Manual for all scheduled

engine maintenance procedures.

CHANGING AND ADDING ENGINE OIL

Use a high-quality engine oil of API (American

Petroleum Institute) service class CC/CD/CE. Refer to

the Engine Operator’s Manual for detailed engine oil

specifications and service procedures.

All models are equipped with remote oil drains.

To change the engine oil:

1 Start the engine and let it warm up.

2 Place a drain pan under the remote oil drain.

3 Remove the oil drain plug and let the oil drain into the

pan until empty.

4 Replace the oil drain plug and dispose of the old oil in

a responsible manner.

5 Remove the oil fill cap from the top of the engine.

6 Add clean oil per the stated capacity.

7 Replace the oil fill cap.

8 Start the engine and let it warm up, then check for

leaks.

CHANGING THE ENGINE FILTERS

Refer to the Engine Operator’s Manual for air, oil, and

fuel filter part numbers and service procedures.

To change the engine oil filter (always do this when

you change the oil):

1 Place an drain pan under the engine oil filter.

2 Remove the old oil filter with an oil filter wrench, then

dispose of the old filter.

3 Using new oil, coat the rubber gasket on the new oil

filter.

4 Install the new oil filter by threading it onto the

spin-on bracket, then tighten with the filter wrench.

Do not over-tighten.

5 Start the engine and let it warm up, then check for

leaks.

To change the engine air filter:

1 Remove the top of the air cleaner.

2 Remove and dispose of the old air filter element.

3 Install the new air filter element.

4 Replace the top of the air cleaner.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Comments to this Manuals

No comments

Allmand-brothers MAXI LITE II User Manual Page 50

Comments to this Manuals

Related products and manuals for Equipment Allmand-brothers MAXI LITE II