Allmand-brothers MAXI LITE II User Manual download pdf (Page 41)

4-4

MOVING THE LIGHT TOWER

PREPARING FOR TRAILERING - STOWING

THE LIGHTS

The light bar and fixtures must be stowed before

trailering or transporting.

To stow the tower lights for trailering:

1 Make sure that all lights are off and tower is lowered

to the full down position.

2 Release the light bar park pin by pulling the ring and

turning it 90 degrees so that the pin remains in the

retracted position.

3 Rotate the light bar into the trailering / transport park

position (in line with trailer) and engage the park pin

by twisting the park pin ring until the plunger is

released and the pin engages and locks into the hole

in the light bar.

4 Reposition the light fixtures for trailering / transport

by pulling them down into the lowest position and

face the fixtures toward the center of the trailer.

WARNING

BURN HAZARD

The light fixtures become extremely hot during use.

Always use caution and heat-resistant gloves when

handling the lights or allow the lights to sufficiently

cool down before handling.

Light bar

Light fixture

Light tower

Tongue

jack

Rear

outrigger

jack

Lunette ring

Side

outrigger

jack

Safety chains

Tongue jack crank

Ball hitch coupler

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 79 80

No comments

Allmand-brothers MAXI LITE II User Manual Page 41