Allmand-brothers I HYDRAULIC User Manual download pdf (Page 24)

ROUTINE MAINTENANCE SCHEDULE

KUBOTA D905 and D1105 and PERKINS 103-10

INSPECTION AND LUBRICATION SCHEDULE

Check hydraulic fluid level.

Lubrication grease specifications: N.G.L.I. consistency #2, high temperature anti-friction

bearing lubricating grease.

Service intervals shown below have been established for operation under normal conditions.

Where equipment is operated under severe conditions (very dusty, extreme heat or cold, etc.)

affected items should be serviced more frequently.

INTERVAL ITEM PROCEDURE

Fuel level Check and fill as necessary

Lubricating oil Check level and condition

Daily or 10 Hr.

Air Cleaner

Clean under very dusty

conditions.

All 10 Hr. items As above

Air Cleaner

Service as required. Service

requirements may be accelerated

Battery Check level of electrolyte

100 Hr.

Engine Generator assembly

Check for fuel and lubricating oil

leaks

All 100 Hr. items As above

Engine lubricating oil system

Drain lubricating oil, flush out

system, renew filter element and

refill with correct grade and type

oil

200 Hr.

Coolant Check level and condition

400 Hr. Fuel Filter Replace with new.

All 200 Hr. Items As above

Fan belt Check tension and condition500 Hr.

Radiator Clean out fins with water or air

All 500 Hr. Items As above

Engine Valves Adjust clearance

Axle wheel bearings Clean and repack

Fuel System Clean sediment from tank

1000 hr. or yearly

1 2 ... 19 20 21 22 23 24 25 26

No comments

Allmand-brothers I HYDRAULIC User Manual Page 24